FA Series

High power sealing with the power of solenoid

Photo of FA-300

Model Lineup

FA-200-10

FA-300

FA-450-5

FA-600-5

Main Features

Compatible packaging materials (total thickness of two or more sheets):

Single-side heating type:

Double-side heating type:

Overview of FA series

The FA series features tabletop semi-automatic sealers capable of high-precision sealing using a powerful sealing pressure. By setting the sealing conditions on the control unit, the sealer operates automatically using the set conditions, thus minimizing variations in the sealing-finish precision otherwise generated by operators.

The FA series sealer has four different sealing lengths in its lineup, enabling a wide variety of usage.

Simple operation

Use the touch panel on the control unit (timer) to set conditions such as the heating time. To switch the setting mode, use SET Switch. After setting the appropriate sealing condition for the packaging material, select either automatic continuous operation or manual air pedal operation.

Good for a variety of packaging materials

The sealing pressure may be adjusted according to bag thickness and material. Adjust the pressure by turning the pressure adjuster nut located at the center of the pressure lever.

Good for seal lengths of 200, 300, 450 and 600mm .

Table-switch plate

Users of the FA-200 and FA-300 series of sealers may use the attached table-switch plate instead of the operation-start switch.

The FA-200 and FA-300 series of sealers are shipped with the air pedal set under the table-switch plate.

The table-switch plate is standard-equipped on the FA-200 and FA-300 series of sealers, and can be installed only on these sealers.

Options

Table (optional): Choose a table for your work environment

We offer various tables as option based on your environment and model. While we do provide the best table for general expected settings for each model, optional tables are available in cases the standard item does not match your needs.

1. Standard table：This is a stainless, single-leaf table that attaches to the seal frame. There is no "600 standard table" as a standard table cannot be installed on a 600mm sealer.

2. Special Table：The Special Table attaches to the support pipe of the optional FA stand. It can support the weight of a heavy package. Height can be adjusted within the range of the support pipe. (See photo on this page explaining the FA stand) If a table is required for the FA-450 and FA-600 series of sealers, use the FA stand combined with a special table.